All figures for valve lift indicate the total travel of the valve from the seated or fully closed position to its fully open position. The figures are given in decimal inches.

This is the advertised duration and is used for comparison only.

This is the duration checked at .050 inches of valve lift with zero valve lash. All duration figures refer to the amount of time (expressed in degrees of crankshaft rotation) that the valve is off its seated (or closed) position.

The grind number is a WEB-CAM reference denoting the master cam or tooling we would be using for that particular application. We have briefly listed an explanation of the performance changes and/or general uses for which each grind is intended. If you need more detailed information, have any questions, or need advice on which profile will work best with the other performance accessories on your vehicle, please don't hesitate to contact WEB-CAM directly.

Regrind: Any part number listed under "Regrind" indicates that we will precision grind your camshaft to the specifications indicated. Note that in many cases, you can reduce your down time by purchasing a cam core outright in addition to the grind. Please refer to the current price list or contact the factory for complete details.

Hardweld: On some profiles, WEB-CAM welds a hard-face overlay to the existing lobe of your camshaft using the most advanced alloys. This has proven extremely durable. In addition, all of the same details for cores and outright cam purchases indicated under "Regrind" apply.

New Cam: All part numbers listed under "New Cam" refer to the specifications precision ground onto a new cast camshaft. All grinds are carefully checked, and double heat treated for long life. No exchange is necessary, as this is an outright purchase.

WEB-CAM products are sold through authorized dealers and distributors. If there is not a dealer in your area please contact the WEB-CAM factory direct. We will make every effort to process your order quickly. All orders that are in stock will be shipped within 24 hours. Special orders and work done on customer cores will take approximately seven to ten working days. Many cams listed as regrinds and hardwelds may be purchased outright. Core charges are listed and will be entirely refunded only if your cores are new or like new. If returned cores are used, WEB-CAM will inspect your cam and determine the value for refund. Cores must be returned within 6 months of purchase.

Foreign orders must be paid in advance in US dollars ($). Checks or money orders must be drawn from a US bank. Wire transfers are accepted, however, most banks will charge service fees.

When you send your cams in for grinding be certain to pack them carefully. Please remove all gears, plugs, drives, and attached devices before sending camshafts. The prices listed do not include labor for removal of these items.

We will ship your order to you by the best method possible, which is usually the United Parcel Service (UPS). Depending on your location, you should allow two to seven days for delivery. For an additional freight charge second day air, third day air or overnight service is available. Please specify when ordering.

Unless prepaid your order will be shipped C.O.D., certified check or money order.

Discount codes are valid for a limited time only. Discounts only apply to retail customers, No Dealers or Distributors. Core charges are not subject to discount. Some products may not qualify for discount. Ask your sales representative for more information. You must mention the discount code at time of order to receive the discount. Discounts may be canceled at any time without prior notice.

We accept Visa, MasterCard, Discover, and American Express. Restrictions may apply for dealers. A 25% deposit is required with your order, and we do not recommend sending personal checks as it takes time to clear the bank. Company checks are accepted only for approved accounts.

No merchandise should be returned without prior authorization from WEB-CAM. Returns and refused orders will be subject to a 20% restock fee. Returns must be sent freight prepaid as we will not accept C.O.D. shipments. Do not send by bus. We reserve the right to refuse any rusty or damaged merchandise that is sent to us for refund or credit.

WEB-CAM, Inc. warrants all hardwelded and new camshafts against excessive cam lobe wear for a period of 6 months from date of purchase. This warranty covers cam lobe wear only and does not cover broken cams, lifters, tappets, rocker arms or any other engine parts. WEB-CAM camshafts are considered racing parts and as such this warranty does not cover abnormal wear due to insufficient lubrication, excessive engine heat, valve spring coil bind and cylinder head or guide interference. In no event shall WEB-CAM, Inc. be liable for labor or service charges from the replacement, removal, installation or shipping of camshafts or related parts. Should your cam lobes wear excessively during the warranty period, return them to WEB-CAM, with proof of purchase. WEB-CAM will inspect your cam and repair or replace (at the WEB-CAM's discretion), under the terms of the warranty, at a cost not to exceed 50% of list price plus freight.